FIAT Bypass – Emergency Starting Device Emulator will only work on vehicles equipped with a mechanical key. It does not work with Smart Remote key. You need to plug the device directly into the OBD2 socket to use it.
Product Overview:
To use FIAT Bypass – Emergency Start Tool you just need to connect it to the OBD2 socket in the car.
The tool bypasses the original immobiliser signal and allows you to start the car right after plugging it in.
Usage Requirements:
Car has to be equipped with mechanical key.
Car has to be equipped with original parts.
The device will work only in case of a lost key.
If the car is equipped with an SGW Module (some models starting from 2017 year), you need to use 2018+ FCA Bypass Adapter in order to bypass Security Gateway Module
When you insert the product to the car the red led will stay on (power).
Green led (code) will start blinking fast.
Turn the ignition ON – the green LED(code) will keep still. (succesfully completed)
Start the car.
—————————————————————————
Note: If the green LED (code) keeps blinking fast after turning the ignition ON, take the key out, wait 30 seconds and turn the ignition ON again. Sometimes the procedure needs to be repeated again.
Note Device is sold only for official use. If you use it for any illeagal purposes, this is your own responsibility!
There are no reviews yet.